FENDER INFLATION GUIDE
Note: In the absence of a pressure gauge, fill fender until sidewalls are firm, but not bulging. Fender should still compress 1/2″ under light pressure. PSI is corrected to 20ºC. Moisten inflation needle prior to inserting into the fender.
TWIN EYE SMOOTH
| Product | Maximum Circumference | Maximum Inflation Pressure | 4.5 x 16 | 13.4 in (34.0 cm) | 2.0 PSI |
|---|---|---|
| 5.5 x 20 | 17.4 in (44.2 cm) | 2.0 PSI |
| 6.5 x 23 | 20.4 in (51.8 cm) | 2.0 PSI |
| 8.5 x 27 | 26.8 in (68.0 cm) | 2.0 PSI |
| 10 x 30 | 33.1 in (84.0 cm) | 1.5 PSI |
| 12 x 34 | 41.5 in (105.4 cm) | 1.5 PSI |
TWIN EYE RIBBED
| Product | Maximum Circumference | Maximum Inflation Pressure | 4.5 x 16 | 13.4 in (34.0 cm) | 2.0 PSI |
|---|---|---|
| 5.5 x 20 | 17.4 in (44.2 cm) | 2.0 PSI |
| 6.5 x 23 | 20.4 in (51.8 cm) | 2.0 PSI |
| 8.5 x 27 | 26.8 in (68.0 cm) | 2.0 PSI |
CENTER HOLE RIBBED
| Product | Maximum Circumference | Maximum Inflation Pressure | 6 x 15 | 18.9 in (48.0 cm) | 2.0 PSI |
|---|---|---|
| 8 x 20 | 25.1 in (51.8 cm) | 2.0 PSI |
| 10 x 25 | 31.4 in (67.8 cm) | 1.5 PSI |
| 12 x 34 | 38.0 in (83.8 cm) | 1.5 PSI |